GPM aluminum rear gear box mounts (multiple positioning holes) - 28PC Set for Traxxas TRX-4
16.90 €
Versandfertig in 1-2 Werktagen
.
GPM Aluminium-Getriebehalterungen hinten - 12-teiliges Set für Traxxas TRX-4 Zubehör:
- Flachkopfschrauben aus Edelstahl 2,5x10-6St
- Edelstahlkopfschrauben 2,5x16-4St
Manuelle Nummer: 8256
Hauptfunktion und Verwendung des Produkts: Mit hinterem Getriebe und hinteren Achsschenkeln verbinden
Hauptvorteile des Upgrades auf dieses Produkt: Aluminium 6061 T6 ist langlebiger und stabiler für die Montage des hinteren Getriebes
Die Merkmale des allgemeinen Erscheinungsbildes dieses Produkts: Verbinden Sie sich mit den hinteren Achsschenkeln mit einem C-Klemmen-Design, einfache Installation
[Dieser Text wurde aus dem Englischen mit einem Programm übersetzt. Irrtümer und Übersetzungsfehler vorbehalten.]
GPM aluminum rear gear box mounts (multiple positioning holes) - 28PC Set for Traxxas TRX-4
Accessories: Stainless Steel Round Head Screws 3x18-4PCS Stainless Steel Round Head Screws 3x16-2PCS Stainless Steel Round Head Screws 3x14-2PCS Stainless Steel Round Head Screws 3x12-2PCS Stainless Steel Cap Head Screws 2.5x16-4PCS Stainless Steel Flat Screws 2.5x10-6PCS 3x6x2 Alloy Collar-6PCS
Manual number: 8256
Product major function & usage: 1. Connect rear gear box and rear knuckle arms 2. Stabilize and adjust the height and angle of the dampers
Major advantages of upgrading to this product: 1. Made with a quality light weight high tensile strength aluminum 6061 T6 for more stable performance with great durability. 2. The position of dampers are modified after the installation of this product. Original installation: the dampers sit in a vertical position. Modified installation: the dampers sit slightly outward. This is to enhance the stability of the vehicle and allow adjustment on the height of dampers.
The features of general appearance of this product: 1. Connect with the rear knuckle arms with a C-clamp design, easy installation 2. The position of dampers are modified after the installation of this product. Original installation: the dampers sit in a vertical position. Modified installation: the dampers sit slightly outward. This is to enhance the stability of the vehicle and allow adjustment on the height of dampers.
Other special notes and comments: 1. Suitable for Traxxas TRX-4 Defender & Tactical Unit. 2. The 2pcs of stainless steel round head screws 3x18 are for stabilizing the tie rods, different to original installation which was to stabilize the tie rods & dampers together. 3. When stabilizing the damper on different positioning holes: (i) Use 3x12 screws when install without alloy collar. (ii) Use 3x14 screws when install with 1 alloy collar. (iii) Use 3x16 screws when install with 2 alloy collar. (iv) Use 3x18 screws when install with 3 alloy collar.
We use a quality light weight high tensile strength aluminum 6061 T6 and is then anodized with scratch resistant colors
[Leider liegt uns für dieses Produkt nur eine englische Beschreibung vor.]
| Hersteller | GPM |
| Warnhinweise | ab 14 Jahre |
Hinweistext oben
