Modellbau Metz


Hobbynox Airbrush Color Intercoat-Clear 2-in-1 Cover Coat 60ml

Artikelnummer: MCHN20030
Artikelcode: 7340056102031

6.79 nicht verfügbar

Grundpreis: 113.17 € / 1 L
inkl. 19% MwSt. zzgl. Versand nach Germany / Deutschland

.


zur Zeit nicht lieferbar

Hobbynox Airbrush Color Intercoat-Clear 2-in-1 Cover Coat 60ml


Hobbynox Airbrush Color Intercoat-Clear 2-in-1 Cover Coat 60ml

Hobbynox Intercoat-Clear 2-in-1 Cover Coat 60ml

Hobbynox Intercoat-Clear is an 2-in-1 water-based polyurethane clear which can booth be used as an protective coat over Hobbynox Airbrush Colors or directly mixed with the paint for improved spray performance, improved coating durability and urethane-like performance with automotive airbrushing on hard surfaces.

When it's sprayed separately on top of Hobbynox Airbrush Colors the Intercoat-Clear dries to a flat, hard and level/smooth surface (but it's not gloss).

When it's mixed directly into Hobbynox Airbrush Colors (aprox 10%) you will increase the spray performance through the airbrush (or spray gun) nozzle and the dried paint will be more scratch resistant, withstand fuel residue better (RC car bodies etc) and also the ability to adhere/stick to hard surfaces is greatly increased.

Regardless if you mix it directly into the paint or use it as a cover coat on the painted item, you will be able to use masking tape on top of the painted surface which is otherwise almost impossible (paint particles will stick to the masking tape glue when you remove the masking tape if not Intercoat-Clear have been used).

Another advantage is that Intercoat-Clear also serves as an adhesion promoter (for painting hard surfaces) when mixed with Hobbynox Airbrush Colors.

It can also be a carrier for "glitter" or "flake" - for example Fasglitter from Parma Faskolor.

Intercoat-Clear 2-in-1 Cover Coat is not a paint reducer and it does not thin the paint. For paint viscosity reduction - use our Hobbynox SP Reducer/Cleaner.

Use the Intercoat-Clear 2-in-1 Cover Coat mixed Airbrush Colors within 6 hours. Keep colors capped airtight after use.

Use our SP Thinner/Cleaner to clean your airbrush or spray gun when Intercoat-Clear 2-in-1 Cover Coat has ben used.

Hobbynox Intercoat-Clear 2-i-1 Cover Coat is compatible with most airbrush colors from Createx and Parma Faskolor.

[Leider liegt uns für dieses Produkt nur eine englische Beschreibung vor.]

Hobbynox Intercoat-Clear ist ein 2-in-1-Polyurethan-Klarlack auf Wasserbasis, der als Schutzschicht über Hobbynox Airbrush-Farben verwendet oder direkt mit der Farbe gemischt werden kann, um die Sprühleistung, die Haltbarkeit der Beschichtung und die urethanähnliche Leistung bei Automobilen zu verbessern Airbrushen auf harten Oberflächen.

Wenn es separat auf Hobbynox Airbrush Colors aufgesprüht wird, trocknet der Intercoat-Clear zu einer flachen, harten und ebenen/glatten Oberfläche (aber es ist kein Glanz).

Wenn es direkt in Hobbynox Airbrush-Farben gemischt wird (ca. 10 %), erhöhen Sie die Sprühleistung durch die Airbrush- (oder Spritzpistolen-) Düse und die getrocknete Farbe wird kratzfester, widersteht Kraftstoffrückständen besser (RC-Car-Karosserien usw.) und auch die Fähigkeit, an harten Oberflächen zu haften/zu haften, wird stark erhöht.

Unabhängig davon, ob Sie es direkt in die Farbe mischen oder es als Deckschicht auf dem lackierten Gegenstand verwenden, können Sie Abdeckband auf der lackierten Oberfläche verwenden, was sonst fast unmöglich ist (Farbpartikel bleiben am Klebstoff des Abdeckbands haften wenn Sie das Abdeckband entfernen, wenn kein Intercoat-Clear verwendet wurde).

Ein weiterer Vorteil ist, dass Intercoat-Clear in Mischung mit Hobbynox Airbrush Colors auch als Haftvermittler (zum Lackieren von harten Oberflächen) dient.

Es kann auch ein Träger für „Glitter“ oder „Flake“ sein – zum Beispiel Fasglitter von Parma Faskolor.

Intercoat-Clear 2-in-1 Cover Coat ist kein Farbverdünner und verdünnt die Farbe nicht. Zur Reduzierung der Lackviskosität verwenden Sie unseren Hobbynox SP Reducer/Cleaner.

Verwenden Sie die Intercoat-Clear 2-in-1 Cover Coat gemischten Airbrush-Farben innerhalb von 6 Stunden. Farben nach Gebrauch luftdicht verschlossen aufbewahren.

Verwenden Sie unseren SP Thinner/Cleaner, um Ihre Airbrush oder Spritzpistole zu reinigen, wenn Intercoat-Clear 2-in-1 Cover Coat verwendet wurde.

Hobbynox Intercoat-Clear 2-i-1 Cover Coat ist kompatibel mit den meisten Airbrush-Farben von Createx und Parma Faskolor.

[Dieser Text wurde aus dem Englischen mit einem Programm übersetzt. Irrtümer und Übersetzungsfehler vorbehalten.]

Hersteller Hobbynox
Warnhinweise ab 14 Jahre

Hinweistext oben

Bitte senden Sie mir eine E-Mail, sobald der Artikel verfügbar ist


Nicht geeignet für Kinder unter 14 Jahren.

Lade ...